|
|
Post by dtsrecordingstudio on Feb 5, 2019 16:30:30 GMT
|
|
|
|
Post by xPsycHoWasPx on Feb 5, 2019 16:37:19 GMT
well u shouldn't be needing to do internet sharing stuff to do simple connection between editor and lemur on iOS. if you can't get connection between Mac by ethernet and iPad by wifi connected to same router. then its your router.. but method u show can be used 2 but again this only recommended if u don't have wifi router or wifi connection is bad between your router and where studio is located. the internet share really is I would only use if there is a USB connection between Mac n iPad. lemur.boards.net/post/31/thread |
|
|
|
Post by dtsrecordingstudio on Feb 5, 2019 16:38:41 GMT
 What's your Mission control look like? |
|
|
|
Post by xPsycHoWasPx on Feb 5, 2019 16:42:52 GMT
i have 1 2 4 activated.
|
|
|
|
Post by dtsrecordingstudio on Feb 5, 2019 16:44:15 GMT
well u shouldn't be needing to do internet sharing stuff to do simple connection between editor and lemur on iOS. if you can't get connection between Mac by ethernet and iPad by wifi connected to same router. then its your router.. but method u show can be used 2 but again this only recommended if u don't have wifi router or wifi connection is bad between your router and where studio is located. the internet share really is I would only use if there is a USB connection between Mac n iPad. But I CAN have my iPad connect via Wifi to my Fios router without having Internet Sharing ON! That's not a problem. Problem is when creating a new network from Mac to iPad. Isn't that what the Lemur instructions say to do? |
|
|
|
Post by xPsycHoWasPx on Feb 5, 2019 16:49:22 GMT
Nop you don't need to do that.
They show this as way to make directly link between ipad n mac without use of router.
But since u have wifi router u can just let your ipad stay connected to that wifi.
There is nothing wrong doing like liine says but it leaves more bugs to fix in some cases. Like u can't be sure ipad will connect everytime your mac is restarted.
I only recommend it if wifi connection between ipad n router is bad.
Because if u do it like that with internet share then lemur can't see other computers. (sometimes it can but offen buggy)
lemur can control more than 1 computer at once as long they have the daemon running on them. You can also directly connect 2 lemur apps ports directly if need to tell one lemur to control something on the other one
Sent from my iPad using Tapatalk
|
|
|
|
Post by dtsrecordingstudio on Feb 5, 2019 16:55:41 GMT
Nop you don't need to do that. They show this as way to make directly link between ipad n mac without use of router. But since u have wifi router u can just let your ipad stay connected to that wifi. There is nothing wrong doing like liine says but it leaves more bugs to fix in some cases. Like u can't be sure ipad will connect everytime your mac is restarted. I only recommend it if wifi connection between ipad n router is bad. Sent from my iPad using Tapatalk Oh! So all I need to do is have both my Mac and iPad connected to the Internet??? Not each other computer to computer? That's easy. But I still can't the Editor to do anything. I have my mission control set as yours. Each desktop is its own space. I can get the Lemur Editor to actual appear on a specific desktop by choosing right click Options in the dock. However! No matter what desktop it is on, i can't click on ANYTHING in the Editor at all. Nothing. No play button gear symbol, nadda. I can't resize it, can't grab it, can't move it, can't shrink it....nothing. Its glued in place to the menu bar. Only thing it does is Quit when quitting. |
|
|
|
Post by dtsrecordingstudio on Feb 5, 2019 17:12:09 GMT
I don't know what to do next. The Editor is acting weird. EVERY other app program on my Mac acts normal with my multiple monitors. If i have a Safari window open on monitor 1, the menu bar for Safari is active. If i have Safari on monitor 2, that menu bar is active. Same if i just drag a window from monitor to monitor. The menu bar becomes the highlighted active on. But NOT with Lemur. I can't drag the Editor at all. And when I click on a different monitor, it doesn't make the Editor window follow. ONLY way to make the Editor window go to another monitor is through the dock Options. But it still does nothing when clicking on the Editor.
I'm out of ideas. Will revisit this tomorrow morning.
|
|
|
|
Post by xPsycHoWasPx on Feb 5, 2019 17:17:55 GMT
I don't know what to do next. The Editor is acting weird. EVERY other app program on my Mac acts normal with my multiple monitors. If i have a Safari window open on monitor 1, the menu bar for Safari is active. If i have Safari on monitor 2, that menu bar is active. Same if i just drag a window from monitor to monitor. The menu bar becomes the highlighted active on. But NOT with Lemur. I can't drag the Editor at all. And when I click on a different monitor, it doesn't make the Editor window follow. ONLY way to make the Editor window go to another monitor is through the dock Options. But it still does nothing when clicking on the Editor. I'm out of ideas. Will revisit this tomorrow morning. Hmm sounds weird.. Sounds like something with your current OS that don't like lemur app. Solution could be is do backup of osx with time machine unless u already doing that. then goto restore and delete Mac HD and then install Mac again and restore all settings from time machine backup.. it wouldn't be the first time I hat to do that because of some acting weird and after it all runs fine. |
|
|
|
Post by dtsrecordingstudio on Feb 6, 2019 4:32:15 GMT
Holy crap! I got it to work! I restarted my MacPro in "safe mode" and it was very erratic with launching the Lemur Editor....very glichy. BUT! When i rebooted normally the next time, I launched the Editor and I could actually move the window around and click on stuff! Ok, now that i got that to work. I'm having trouble with the connection part. I click the play button which opens the Connection window and my iPad is listed. But when i click on it to choose it, it keeps saying "Unable to connect, host must be busy. Please check destination address and retry". I'm not sure what to enter. Do I use the computer to computer shared network? Or do I turn OFF wifi on my MacPro, (which has ethernet), and connect my iPad to internet via WIFI straight to my Fios router? Question is....how does my mac and iPad see each other if they are not connected via their own network? What IP add do I use in the Lemur connection window?  |
|
|
|
Post by dtsrecordingstudio on Feb 6, 2019 4:39:35 GMT
Whoo hoo! I'm IN!! Just had to have the Lemur app open on the iPad and it connected! Damn, this was hard to figure out. Just gotta program stuff now i guess to control Cubase Pro.
|
|
|
|
Post by xPsycHoWasPx on Feb 6, 2019 8:24:32 GMT
Good to hear it works.
But just Disable wifi on mac again, and only use ethernet on that.
Ipad use wifi to fio router.
And u should be fine in the future.
|
|
|
|
Post by dtsrecordingstudio on Feb 7, 2019 0:00:27 GMT
Good to hear it works. But just Disable wifi on mac again, and only use ethernet on that. Ipad use wifi to fio router. And u should be fine in the future. I'll try that again now that I know it works. But i have it on the shared wifi network at the moment. |
|
|
|
Post by dtsrecordingstudio on Feb 7, 2019 0:34:29 GMT
Well that didn't last long..... Just booted since last night when i got it to work and now its not working again. Thought maybe it would be responsive. Nope. Guess I gotta boot in Safe Mode again and prob every time. Ugh.
|
|
|
|
Post by xPsycHoWasPx on Feb 7, 2019 15:41:06 GMT
Sounds like a mac os problem.
I recommend u backup your mac by timemachine.
Then make new fresh install with either high sierra or Mojave.
Then restore all settings from your time machine..
So it will be like fresh install but maintains the app and user settings etc.
I never experienced that kind of issue, with any ver of mac os, since the last +1 year I've been using Lemur.
|
|
