gg
New Member
Posts: 1
|
Post by gg on Apr 29, 2019 12:09:58 GMT
Hi !
My first post on this forum.
I try to use Lemur for a week now and, with the help of my readings, in the manual and on the net (including this forum) I'm very close to set up a great config but... it's still is a last problem, and I think I need help. I don't think it's complicated but, I just don't find the solution.
I have an old hardware Jazzmutant interface (v.2.0.3) wish is working quite well. I know everybody run Lemur on iPad now but I don't want to put it in the trash just like this. Without fight !
I try to use Lemur with Panoramix, a soft from Ircam. It's quite the same thing of Spat 5. I can connect my hardware control surface with the editor and drive Panoramix. That's great ! But, the feedback doesn't work and I don't understand why.
For exemple, when I move a fader with a custom adress in on Lemur like /stereo/1/azim, this information goes to my computer IP thru the port 10000 and my first stereo track moves in Panoramix. Now, when I move the track on Panoramix, it sends the same data (/stereo/1/azim) to the same port (10000 in my case). My Jazzmutant receive something. I can see Rx changing in real time but I can't check what exactly. And my fader just doesn't work. In the mapping OSC of my object OSC Target is on OSC 0 and Target is on Parent (OSC 0) like said in the manual.
Can you help me please ? Before I become completely crazy.
Thanks a lot. GG
|
|
hoops
New Member
Posts: 1
|
Post by hoops on Apr 30, 2019 23:47:26 GMT
Hi gg!
I don’t know about the hardware Lemur, but the software version can only receive OSC on port 8000. Try changing the send port in Panoramix to 8000 and see if that works.
Good luck!
|
|